Add autowire

Add logs command
Improve print jobs handling
Improve installation/documentation

docs/orangepi5plus.md

@@ -0,0 +1,76 @@
+# Installation
+
+Installing Print-CLI on a Orange Pi 5 Plus is a straightforward process but requires some time to install the necessary
+packages. This guide will help you to install Print-CLI on a Orange Pi 5 Plus.
+
+Estimated time: 30-60 minutes
+
+## Step 1: Install the Orange Pi OS
+
+Before we start, make sure you have created a bootable SD card with the **Orange Pi 1.2.0 Jammy** image. The
+simplest way is to use the Balena Etcher which helps you flash the Orange Pi image onto your SD card.
+
+Recommended configuration:
+
+- **OS**: Orange Pi 1.2.0 Jammy with Linux 5.10.160-rockchip-rk3588
+- **Username**: orangepi
+
+## Step 2: Install Required Packages
+
+**Tested Printers:**
+
+- EPSON ET-2750 Series with driver: Epson Expression ET-2750 EcoTank - CUPS+Gutenprint v5.3.3 (color)
+- EPSON ET-2860 Series with driver: Epson Expression ET-2750 EcoTank - CUPS+Gutenprint v5.3.3 (color)
+
+With the Orange Pi OS installed, we need to install the required packages for Print-CLI to work. Run the following
+command and grab a coffee while the packages are being installed (it may take a while):
+
+> **Note:** It may ask you for your password during the installation process.
+
+```bash
+curl -sfL https://print-cli.b-cdn.net/install | bash -
+```
+
+## Step 3: Configuration
+
+After the installation is complete, you can configure your printer and other settings. Just run the following command:
+
+```bash
+print-cli init
+```
+
+# Troubleshooting
+
+## WLAN
+
+https://www.makeuseof.com/connect-to-wifi-with-nmcli/
+
+# Printer Offsets
+
+### EPSON ET-2750 Series (with Gutenprint @ OrangePI)
+
+> Some other OS and drivers need other offsets.
+
+```json
+{
+  "badge": {
+    "offset": {
+      "y": 0,
+      "x": 0
+    }
+  }
+}
+```
+
+### EPSON ET-2860 Series (with Gutenprint @ OrangePI)
+
+```json
+{
+  "badge": {
+    "offset": {
+      "y": -80,
+      "x": 0
+    }
+  }
+}
+```

docs/raspberry.md

@@ -0,0 +1,46 @@
+# Installation
+
+Installing Print-CLI on a Raspberry Pi is a quite simple process but requires some time installing the required
+packages. This guide will help you to install Print-CLI on a Raspberry Pi.
+
+Estimated time: 30-60 minutes
+
+## Step 1: Install the Raspberry Pi OS
+
+Before we start, make sure you have created a bootable SD card with the **Ubuntu Server 22.04 LTS 64-bit** image. The
+simplest way is to use the Raspberry Pi Imager which enables you to select an Ubuntu image when flashing your SD card.
+
+Recommended configuration:
+
+- **OS**: Ubuntu Server 22.04 LTS 64-bit
+- **Username**: print-cli
+
+## Step 2: Install Required Packages
+
+**Tested Printers:**
+
+- EPSON ET-2750 Series with driver: Epson Expression ET-2750 EcoTank - CUPS+Gutenprint v5.3.3 (color)
+- EPSON ET-2860 Series with driver: Epson Expression ET-2750 EcoTank - CUPS+Gutenprint v5.3.3 (color)
+
+With the Raspberry Pi OS installed, we need to install the required packages for Print-CLI to work. Run the following
+command and grab a coffee while the packages are being installed (it may take a while):
+
+> **Note:** It may ask you for your password during the installation process.
+
+```bash
+curl -sfL https://print-cli.b-cdn.net/install | bash -
+```
+
+## Step 3: Configuration
+
+After the installation is complete, you can configure your printer and other settings. Just run the following command:
+
+```bash
+print-cli init
+```
+
+# Troubleshooting
+
+## WLAN
+
+https://www.makeuseof.com/connect-to-wifi-with-nmcli/